Users Manual Part 1

Getting started with the mobile app Tikee Remote

We recommand to test the connection of your Tikee once the parameters are set up. For that

click on ‘’Test connection’’. This step may take several minutes because the Tikee will check all of

the steps to be connected to myTikee cloud platform server.

At the end of the test you will receive a notiﬁcation about the success or not of the test. You will

also receive information about the signal quality and the type of connection.

Note : For optimal operation, a 4G(LTE) connection is required. Correct uploading of photos

in 3G is not guaranteed in all conditions. In this case it is recommended to disactivate the

uploading of photos. However, you can keep connectivity enabled to get status information

from the camera.

Note : Be aware of the costs of data roaming in a foreign country.

Using the camera without a connection

If not conﬁgured, the Tikee will not send any data.

If no network is in range or if you do not want the photos be automatically sent to the myTikee

cloud platform. Click on the None icon to have no connection.

In this case, photos backup will be made locally on the microSD card and this will allow you to

get a right image (RIGHT) and a left image (LEFT). Then, if you wish, you will be able to merge

these images by drag and drop in myTikee cloud platform - see page 32.

Tip : By setting up a Wiﬁ or LTE network but by disabling photos upload, the Tikee camera will

send only its status (battery, network, microSD card, etc.) for remote monitoring.

Advanced settings

Formatting the microSD card

We recommend to format the microSD card before ﬁrst use. You can format it directly from the

mobile application.

Here is the path on the mobile application to format the microSD card.

You cannot format the microSD card when a timelapse sequence is in progress.

Unlinking your Tikee from your user account

The association of a Tikee with a user account is automatic and occurs during the ﬁrst linking

(connection of your Tikee to the mobile app). During the following connections, the Tikee linked

to your account are marked with 2 chains:

Format

T-A01 300

Tikee 3PRO

T-D01007

Tikee 3PRO+