Users Manual Part 1

15
Getting started with the mobile app Tikee Remote
Connecting to WiFi
The WiFi connection is not possible on WiFis that require a connection to a web portal (which is
often the case on an industrial site or on free networks WiFis).
Click on Network then Wifi on the homepage.
SSID : name of the WiFi to which you want to be connected to.
Case sensitive
Password or security key : enter the password/security key of
the wireless network. Case sensitive
Security : Scroll to choose the wireless network security type.
Note: Most actual equipment uses ‘‘WPA2-PSK’’ security
Once the parameters filled to save them click on: Save
We recommand to test the connection of your Tikee once the
parameters are set up.
For that click on ‘’Test connection’’. This step may take several
minutes because the Tikee will check all of the steps to be
connected to myTikee cloud platform server.
At the end of the test you will receive a notification about the
success or not of the test.
If the connection fails : check if the quality of the wireless network is sufficient (for example you
can test the connection on your smartphone beforehand) and that your credentials are correct.
Note : you can connect the Tikee through a mobile hotspot using a smartphone with a 4G
connection.
Connecting to an LTE telecom network
An active microSIM card needs to be inserted in its appropriate slot.
APN : this field is required - most of the time you can find it on
the website of your telecom service provider or on your mail
opening line.
PIN : This is the PIN code of the SIM card. Leave blank if PIN off.
User: to complete if provided by your mobile operator (These
are not Enlaps identifiers)
Password : To complete if provided by your mobile operator
(This is not the Enlaps password).
PIN 2 : to complete if provided by your mobile operator
Once the parameters filled to save them
click on : Save