User's Guide

8
We cannot be held responsible for any damages that may result from improper use of our solution.
Your Tikee has wide angle optics. When photos are uploaded to the web application, it makes the
fusion of the left image and the right image. The images are rst put at and then combined to
get a single panoramic image.
Therefore we recommend to keep your Tikee as horizontal as possible during the installation to
minimize distortion of the image (you can use a bubble level or your smartphone with a dedicated
mobile application).
Caution : If the camera is tilted (high-angle shot or low-angle), the wide angle leads to a
deformation of the skyline on the nal panorama
Important : To avoid problems of image fusion, please be sure that no object is placed less
than 5 meters in the foreground of the Tikee .
Once you have chosen the fra-
ming, lock the position of your
Tikee so that there is no change
in
the framing over the time.
Be sure to use a hard mounting
bracket to ensure a same fra-
ming of the shooting over the
time.
We recommend to use the stain-
less steel arm designed by En-
laps for Tikee.
Tikee’s rst start up
Tikee view angle (°220)
5m
Avoid object in this area
You should center your focus object
in this area more than 5 meters from
the Tikee *
//
//
90°
1,5 x installation height
It is advisable to lay Tikee at,
half-height up to the nal construction.