User's Guide
7
For a period of a few hours shooting, your Tikee can be installed on its rubber sole on a sufciently
at and not tilted surface or on a camera tripod.
For a period of several days/months shooting, we recommend to use a rigid support which ensure
a same framing over time and secure the position of your Tikee. If you want you will nd a set of
accessories for your Tikee on our store at: https://enlaps.io/products-accessories/?lang=en
To avoid the theft and/or acts of vandalism, place your Tikee in a discreet location, high up and
use an anti-theft system (your Tikee has a dedicated anti-theft insert).
Important: To ensure the smooth running of your timelapse sequence ;
It is advisable to control the Tikee on site in order to see its general condition (xing, solar panel’s
cleanliness, objectives’ cleanliness, etc.). It is also essential to check the proper functioning of your
Tikee on your Mytikee account: battery’s status, microSD card’s status, network status, date of the
last connection, etc.
Caution : Be sure to respect the safety instructions related to work at heights and every recom-
mandation of security and installation of the site where your place your Tikee.
Be sure that the proper installation of the xing support and of the Tikee are correct to prevent
any risk of falling. The Tikee should not be installed in balanced or tilted/movable surface that
could lead to its fall.
By connecting to Tikee camera with the Tikee Remote mobile application:
- Check that the last update is done. If this is not the case, update by accessing to the
manufacturer’s website, page :
https://enlaps.io/update/?lang=en
- Check the battery status. A full charge (= 100%) is necessary
- Check network quality. Achieve and validate a connection test.
Tikee’s rst start up
3. Tikee’s rst start up
First connection and rst setting
Recommendations for installing and for framing
with your Tikee