User's Guide

The sequence(s) start(s) when the Trigger LED ashes slowly every 10s during the whole shooting

Note : If you create new time lapses sequences and that your Tikee is still in timelapse capture

mode, you don’t need to start again the new time lapses sequences.

Checking the progress of a timelapse sequence

You can check the status of each scheduled timelapse sequences by clicking on it from the mosaic

sequences menu.

‘’Long-term’’ sequences can be searched, edited and removed.

‘’Short-term’’ sequences can be searched and removed, but not edited.

When a sequence is in progress you can know how much images have been shot and if you have

set up the connection

To stop a timelapse sequence, click on «Stop timelapse» button

Note : A short-term timelapse sequence can not be restarted. A long-term timelapse sequence

can be restarted if its setting is still valid.

To remove the setting of a time lapse sequence :

Go to sequences menu, click on the sequence and choose delete.

This only causes the removal of settings and does not delete the project on Mytikee web application

or the photos on the microSD card.

Checking the status of your Tikee

You can check the status of your Tikee by clicking on: on the left top of the mobile app

Indicates the status of your Tikee. The different status are:

- Idle - Waiting,

- Timelapse in progress - Timelapse done

- Active camera

(take pictures according to sequence’s setting)

- Inactive camera (it does not take into account sequence’s setting)

Indicates the remaining battery percentage of Tikee.

Indicates the available space on the memory card.

Note : It should remain at least 200 MB of free space to start a

sequence.

Click on this button after setting up a timelapse sequence to start

recording

Getting started with the mobile app Tikee Remote

