User's Guide

15
To create your rst sequence, click on
Make a preview of the frame after the connections tests (SD card, Tikee connected to the Wi or
the 4G network and smartphone or tablet connected to the Wi or the 4G network)
Choose the type of sequence and set it up.
LONG TERM BURST* EVENT
*Only available in LONG TERM sequence **Without sending
*** Set 00h to 23h59 for shooting 24/24
****Every 25 images and at least once a day or according to your send interval settings
Once your timelapse sequence is congured, a « Start now» notications appears. You can validate
by clicking on «Yes» or launch it from the mobile application by clicking on ‘’Start recording’’ or by
pressing the button Trigger on your Tikee (see corresponding chapter).
The timelapse will start at the time you set.
Once the time lapse starts: the power LED turns off and the trigger LED ashes in blue every 10s.
You can put an end to an ongoing sequence by pressing again the ‘’Trigger’’ button.
Note : in case of stopping an in progress short-term sequence before the end normally set, the
images are not uploaded in the web application but are kept on the microSD card.
You can check the status of your Tikee at any time by clicking on:
Getting started with the mobile app Tikee Remote
Setting up a timelapse sequence
Minimum interval
Maximum interval
DNG Format
Max. duration
Shooting during
a period of the day
Upload of photos
on the web app
1min
24h
DNG**
et JPEG
Start date and End
date or Innite
(depends on the interval,
the sunshine and the
connectivity)
Yes***
Yes****
5s
45s
JPEG
Limited to 2h30 /
200 photos max
(depends on the interval,
the sunshine and the
connectivity)
Yes***
Yes****
5s
45s
JPEG
Limited to 12h /
3000 photos max
(200 photos min.)
(depends on the interval,
the sunshine and the
connectivity)
Yes
No**
