User's Guide
13
This step may take several minutes because the Tikee will check all of the steps to be connected
to Mytikee web application server.
At the end of the test you will receive a notication about the success or not of the test.
Not connecting your Tikee
If not congured, the Tikee will not send any data.
If no network is in range or if you do not want the photos be automatically sent to the Mytikee
web app: click the Wi and/or 4G icons to shaded them, connectivity is then disabled.
In this case, photos backup will be made locally on the microSD card and this will allow you to get
a right image (RIGHT) and a left image (LEFT). Then, if you wish, you will be able to merge these
images by drag and drop in the web application - see page 27.
Tip : By setting up a Wi or 4G network (TikeePRO) but by disabling photos upload, the Tikee
camera will send only its status (battery, network, microSD card, etc.) for remote monitoring.
Advanced settings
Formatting the microSD card
We recommend to format the microSD card before rst use. You can format it directly from the
mobile application.
Here is the path on the mobile application to format the microSD card.
You cannot format the microSD card when a timelapse sequence is in progress.
Unlinking your Tikee from your user account
The association of a Tikee with a user account is automatic and occurs during the rst linking
(connection of your Tikee to the mobile app). During the following connections, the Tikee linked
to your account are marked with 2 chains:
A Tikee can only be associated with a single user account. It is possible to connect several
smartphones with the same user account.
Getting started with the mobile app Tikee Remote
Linked TikeeUnlinked Tikee