User's Guide

12
Connecting to WiFi (Tikee and TikeePRO)
The WiFi connection is not possible on WiFis that require a connection to a web portal (which is
often the case on an industrial site or on free networks WiFis).
SSID : name of the WiFi to which you want to be connected to.
Case sensitive
Password or security key : enter the password/security key of
the wireless network. Case sensitive
Security type : choose from the drop-down menu the type of
wireless network security.
Note: Most actual equipment uses ‘‘WPA2-PSK’’ security
Once the parameters lled to save them click on: Save
We recommand to test the connection of your Tikee once the
parameters are set up.
For that click on ‘’Test connection’’. This step may take several
minutes because the Tikee will check all of the steps to be
connected to Mytikee web application server.
At the end of the test you will receive a notication about the
success or not of the test.
In case of failure: check if the quality of the wireless network is sufcient (for example you can test
the connection on your smartphone beforehand) and that the IDs are correct.
Connecting to a 3G/4G telecom network (TikeePRO)
Previously you have to insert an active microSIM (with send data activated) into the dedicated slot
of your Tikee.
Username: to complete if provided by your mobile operator
Password : this eld is optional
APN : this eld is required - most of the time you can nd it on
the website of your telecom service provider or on your mail
opening line
PIN 1 : This is the PIN code of the SIM card. Leave blank if PIN
off.
PIN 2 : to complete if provided by your mobile operator
Once the parameters lled to save them
click on : Save
We recommand to test the connection of your Tikee once the
parameters are set up. For that click on ‘’Test connection’’.
Getting started with the mobile app Tikee Remote