User Manual
4
ISWITCH MULTIBOX OFF LINE
Installation safety information
Read these instructions carefully before installing and starting up the iSWITCH
energy saver.
A diagram has been included to make the connections easier. Any improper
connections shall be the full liability of the installation assembler and will invalidate
any existing warranties. If you have any questions, please contact your nearest
distributor.
1. Please read the installation instructions before installing the
unit in order to avoid any errors.
2. Our products must be installed and handled by authorised personnel. In
particular, the electrical connections must only be carried out by qualified
specialists.
3. Only use your unit with the type of power source shown on the marking
label. If you are not sure of the type of power source your installation has,
check with your electricity company.
4. Disconnect the unit from the supply source before starting any operation
for the maintenance or modification of the installation.
5. Any connection which is not correctly carried out could cause personal
injury and/or irreparable damage to the product.
6. The electrical connection of the appliance must be carried out in
accordance with valid standards and directives and applicable legislation.
7. The electrical installation must include a device which cuts off the power
supply in the event of overcurrents caused by a malfunction in the unit.
8. Once the installation has been completed, the unit must be closed and the
cover plate fitted in order to protect the user from possible electric shocks.