User's Guide

Page
3
/
3
7. Other features--Set ID No.
Note: ID No. already set by factory, if need change it, please follow below steps.
○
1
Set ID No.(Program)
Press “Mode”
button switch to set Buzz Id ( in LCD screen will show this icon ), and press
“Next No.“ /“Previous No.” button to select the number, and then, press “Start” . At the
same time, press push button3 times quickly,then the buzzer green light flashes, and the master controller
display “ok”.
(Remark:After setting ID No. Press the ‘Mode’ button again,switch to the normal mode.)