Owner’s Manual Sopranino Electrostatic Super Tweeter
IMPORTANT SAFETY INSTRUCTIONS Service 1. Read these instructions. è 2. Heed all warnings. 3. Do not use this apparatus near water, high humid environment. 4. The product is designed for home audio system only. 5. Clean only with soft, dry cloth. 6. Install the unit on stable support and out of reach of children. 7. Do not install near any heat sources such as under direct sunlight, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8.
Contents IMPORTANT SAFETY INSTRUCTIONS....................……..1 Service.................................................................................. 1 Introduction......................................................................... 3 Content of Package............................................................ 3 Overview ............................................................................. 4 Back panel ....................................................................……4 Front..........
Introduction information, beyond the range of human hearing for pure Sopranino by ENIGMAcoustics is the world's first super tones. In order for music to be accurately reproduced, it is tweeter based on the one-of-a kind self-biased (passive) essential to accurately preserve this information. Users will electrostatic loudspeaker (SBESL™) technology.
Overview Back panel 1. Gain 0dB: No attenuation -3dB: Attenuate input power by 3dB (half power) 2. Crossover Frequency: LOW: Cut off input frequency at lower crossover point MID: Cut off input frequency at middle crossover point HIGH: Cut off input frequency at higher crossover point 3.
Front View Left Channel Right Channel The left and right channels of Sopranino are fully symmetrical design for aesthetic and user friendly considerations.
Positioning Positioning is vital to Sopranino super tweeter’s performance 5. Forward or backward? When Sopranino placed for it is dealing with the most delicate and sensitive frequency relatively forward, it tends to have forward image, for range. A minor shift of location may lead to dramatic change example the vocalist may appear to be closer. in audition.
Connecting NOTICE: Always turn off the amplifiers and other equipment when installing or uninstalling the devices. The super tweeters should be connected parallel with your main speakers, positive (red) to positive and negative (black) to negative. Typical wiring: A. Typical single-wired installation. The SuperTweeter is simply connected across your speaker terminals. B. Bi-wiring installation. The SuperTweeter is connected across the HF terminals on your loudspeaker.
Adjustment and tuning Crossing over with main loudspeakers Matching the main loudspeakers The Sopranino is designed for reproduction of very high The Sopranino is designed with a nominal sensitivity 90dB at frequency range of music. The Sopranino is equipped with a 2.82V input. It is compatible with most recently developed carefully designed filter to keep out the unwanted low high-resolution loudspeaker system. In case your speakers frequency signals from entering the devices.
Care and Maintenance Troubleshooting Components of the highest quality are used in Sopranino. Problem Possible cause Action Power on but no No signal from Check your sound source amplifier output This assures years of trouble free operation. However, precautions should be taken under any circumstances. and cable connection Speaker damaged Swap speakers to check if the problem is caused by speaker failure.
The cabinet of Sopranino is made from high quality Our speakers are built to a high standard and can last decade aerodynamic grade aluminum carefully anodized and if used or handled in accordance with instructions, common brushed for its finish. To clean the cabinet uses a mild hi-end audio etiquette and proper care, and not being moistened cloth only. repaired or tampered with by anyone other than The stand of Sopranino is made of highest grade white or ENIGMAcoustics.
Technical Specifications System Electrostatic super tweeter Frequency Response (+/- 3 dB) 8 kHz – 40 kHz Sensitivity (2.82V on axis) 90 dB Recommended power 50 W Crossover Frequency 8/10/12 kHz Crossover Slope 12db/Oct Weight (net/shipping) 2.7/10.
Serial No: Model: ENIGMAcoustics Warranty Card Name: Sales: Address: Store Address: Date of Purchase: ENIGMAcoustics Inc.
Sopranino Electrostatic SuperTweeter ENIGMAcoustics Inc.
