Owner’s Manual Sopranino Electrostatic SuperTweeter
IMPORTANT SAFETY INSTRUCTIONS Service 1. Read these instructions. 2. Heed all warnings. 3. Do not use this apparatus near water, high humid environment. 4. The product is designed for home audio system only. 5. Clean only with soft, dry cloth. 6. Install the unit on stable support and out of reach of children. 7. Do not install near any heat sources such as under direct sunlight, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8.
Contents Technical Specifications ................................................. 10 Warranty Card …………………………………………..……11 IMPORTANT SAFETY INSTRUCTIONS....................……..1 Service.................................................................................. 1 Introduction......................................................................... 3 Content of Package............................................................ 3 Overview .............................................................
Introduction the range of human hearing for pure tones. For music to be accurately reproduced, it is essential to accurately preserve Dear Audiophile, this information. Users will find Sopranino can work with a broad range of quality loudspeaker systems. Adjustments are Thank you for choosing ENIGMAcoustics Sopranino, the first provided with carefully pre-selected crossover frequency and SuperTweeter based on electrostatic technology. Sopranino level to enable flexible matching.
Overview Back panel 1. Crossover Frequency: LOW: Cut off input frequency at lower crossover point MID: Cut off input frequency at middle crossover point HIGH: Cut off input frequency at higher crossover point 2.
Front View Left Channel Right Channel The left and right channels of Sopranino are fully symmetric design for aesthetic and user friendly considerations.
Positioning To achieve optimal performance: 1. Place speakers on a firm and steady surface. 2. Aim speakers a little toe-in toward the listener by rotating horizontally 3.
Connecting NOTICE: Always turn off the amplifiers and other equipment when installing or uninstalling the units. The SuperTweeter should be connected across your main speakers, positive (red) to positive and negative (black) to negative. Typical wiring: A. Typical single-wired installation. The SuperTweeter is simply connected across your speaker terminals. B. Bi-wiring installation. The SuperTweeter is connected across the HF terminals on your loudspeaker.
Adjustment and tuning Matching the main loudspeakers Crossing over with main loudspeakers The Sopranino is designed with a nominal sensitivity at The Sopranino is designed for reproducing very high 86dB/1m/1W. It is a little bit lower than big floor standing frequency information of music. The Sopranino is equipped with a carefully designed filter to keep out the unwanted low frequency signals from entering the units.
Troubleshooting Care and Maintenance Components of the highest quality are used in Sopranino. Problem Possible cause Action Power on but no No signal from Check your sound source amplifier output This assures years of trouble free operation. However, precautions should be taken under any circumstances. and cable connection Speaker damaged Swap speakers to check if the problem is caused by speaker failure.
main housing. Technical Specifications The cabinet of Sopranino is made from high quality aerodynamic grade aluminum carefully anodized and System Electrostatic supertweeter brushed for its finish. To clean the cabinet uses a mild Frequency Response (+/- 3 dB) 8 kHz – 40 kHz moistened cloth only.
Serial No: ENIGMAcoustics Model: Warranty Card Name: Sales: Address: Store Address: Date of Purchase: ENIGMAcoustics Inc.
Sopranino Electrostatic SuperTweeter ENIGMAcoustics Inc.
