User manual

Code: ENIGMA III User Manual
Edition: 1 Revision: 4
Date: 19/12/2008
Page: 85/97
8.3 getversion
Returns version numbers of hardware protocol and firmware versions for DSP and FPGAs. Output:
protocol - HW communication protocol, unsigned
dsp - PCI DSP firmware version,unsigned
fpgaPci - PCI FPGA firmware version, unsigned
fpgaIfd - IFD FPGA firmware version, unsigned
software - ENIGMA software version, unsigned
8.4 sampleburst
Get burst samples centered around t=0. This command is used by the burst configuration tool in FrogRT
Parameter: SamplesNum, integer
Returns: SamplesData – array of , specified number of burst samples
8.5 setafcmode
Parameter: mode
0 – AFC
1 – MFC
2 – AFC Search
3 – MFC Hold
4 – AFC Hold
staloMFC_RFFreq (Frequency in Hz)
8.6 getifsampling
Request IF sampling parameters
Parameter: None
Returns: IFFreq (IF frequency)
maxFilterDecFactor (maximum filter decimation factor)
maxFilterNumberMult (maximum filter multiplication factor)
minDataRateFactor (minimum data rate)
GAMIC Proprietary