User manual

Code: ENIGMA III User Manual
Edition: 1 Revision: 4
Date: 19/12/2008
Page: 83/97
8.2.2 getantennaspeed
get antenna params. Returns:
azspeed azimuth speed, deg/s
elspeed elevation speed, deg/s
8.2.3 gettemperature
Temperature in degrees, zero means not available. Output arguments:
ambientIFDigPart - ambient temperature, IF Digitizer Digital part, degree
coreIFDigPLD - core temperature, IF Digitizer PLD, degree
ambientIFDigBurst - ambient temperature, IF Digitizer ADC Burst Channel, degree
ambientIFDigHor - ambient temperature, IF Digitizer ADC Horizontal Channel, degree
ambientIFDigVer - ambient temperature, IF Digitizer ADC Vertical Channel, degree
These values are also found in the ray header.
8.2.4 getpower
Power status. Output arguments:
plus5dig - IF Digitizer Digital Power Supply +5Volt status, boolean
minus5dig - IF Digitizer Digital Power Supply -5Volt status, boolean
plus15dig - IF Digitizer Digital Power Supply +15Volt status, boolean
minus15dig - IF Digitizer Digital Power Supply -15Volt status, boolean
plus3d3dig - IF Digitizer Digital Power Supply +3.3Volt status, boolean
plus3d3an - IF Digitizer Analog Power Supply +3.3Volt status, boolean
plus5an - IF Digitizer Analog Power Supply +5Volt status, boolean
minus5an - IF Digitizer Analog Power Supply -5Volt status, boolean
GAMIC Proprietary