User manual

Code: ENIGMA III User Manual
Edition: 1 Revision: 4
Date: 19/12/2008
Page: 39/97
DataFormat: Frog output data format type
DualPolMode: dual polarization mode
ElevationAbsoluteOffset: calibratiobn offset for antenna alignment
ElevationSynchroOffset: calibratiobn offset for encoder/synchro diference
FFTWindow: Type of smoothing window for FFT and DFT ACF algorithms
FIRCoeff0: FIR coefficients for pulse 0
FIRCoeff1: FIR coefficients for pulse 1
FIRCoeff2: FIR coefficients for pulse 2
FIRCoeff3: FIR coefficients for pulse 3
FilterDelay: IIR filter delay
HorVerSwitchDuration: Duration for MOHP Hor/Ver switching device in ms
IFDTagBaudRate: Baud rate IFD
InterpolationMode: FFT/DFT Interpolation method
LdrOffset: LDR offset
LongRaySize: If true, use 32bit raysize word
MaxFilterRange: Maximum filter range
NOISEThreshold: NOISE threshold
PCIRecTagBaudRate: Baud rate PCIREC
PRFTable: PRF table
PhidpOffset: PhiDP offset
PhidpSNR: Phidp SNR threshold
PrfLimits: PRF limits
PulseWidthIndex: PulseWidthIndex
RHOHVThreshold: RHOHV threshold
RainAttenuation: Rain attenuation correction
RainAttenuation_A: RainAttenuation_A
RainAttenuation_B: RainAttenuation_B
RainAttenuation_a: RainAttenuation_a
RainAttenuation_b: RainAttenuation_b
Range: Range for acquisition in km
RangeAdjust0: Range adjustment
RangeAdjust1: Range adjustment
RangeAdjust2: Range adjustment
RangeAdjust3: Range adjustment
RangeNorm: Range normalisation
RangeSample: Range samples
RangeStep: Range step in km.
RaySize: expected ray size
RecordName: file to save recorded raw data
RecorderMode: filenameRecorder mode
SDPType: SDP Type
SQIThreshold: SQI threshold
SectorblankingTable: Flags for 2D sectorblanking table
SectorblankingTableEnabled: Sector blanking on/off
SmoothDualPolParameter: Apply smoothing filter to KDP, RHOHV and ZDR
SpeckleRemover2D: 2D speckle remover
SpeckleRemoverV: Doppler speckle remover
GAMIC Proprietary