Specifications

Project Properties Tools
80 VisiLogic: Getting Started
Parameters Function
Disable Project
upload
If you select this, no user will be able to upload the project from the PLC, even
with a password.
Rebuild, then
Download
Select this if the project was originally created in another VisiLogic version.
Warn about
Vision 120
Snap-in
conflicts
This option is checked by default, causing, VisiLogic to issue a compilation
warning message if the Vision120 selected in Hardware Configuration is
different from the one to which you are downloading.
Uncheck this option to disable such warnings.
Compiled
Ladder
Allocation
If your application requires, you can select this option and enter a different
amount.
Back up and
Restore PLC
RAM Data
Backup a project together with all of the current values in Data Tables and all
memory operand values.
If this option is selected:
• At project upload, the PC will upload all of the current values in Data
Tables and all operands--except for system operands. To back up
system operand values, store them to memory operands.
• At project download, the PC will download the complete project,
including all of the current values in Data Tables and all memory
operands.
Note that this option is not part of the project. It affects all the projects
downloaded from the PC.
Save Unit ID in
Project
When you select the Save Unit ID option, the ID number of the controller
selected in Connection>Communication & OS>Vision-PC Communication
Settings is saved together with the project.
You will not be able to download the project to another controller until the
number is changed.
Display OnLine
Tools
Keeps the Test Tool bar from being displayed during Test Mode
.
Check Digital
Signature
Select this to check the digital signature of the project in a PLC every time PC-
PLC connection is established.