Specifications

Information Mode Getting Started
30 VisiLogic: Getting Started
The categories of available information depend on the controller model. The
table below shows the basic categories of information.
Category Subject Possible Actions
Data Types Memory Bits
•
View bit status
System Bits
•
Change bit status (Set/Reset)
Memory Integers
System Integers
Memory Longs
System Longs
Memory Double
Words
System Double
Words
• View integer/long integer/double word value.
• Change values
• Toggle Base: view the value in decimal or
hexadecimal form.
Inputs
• View input status. U
• Force input status to 1 (FR1) or 0 (FR0). Forced
values stay in effect until Normal mode (NRM) is
selected, or until the controller is initialized or
reset.
Note • Forced values do influence your program.
This can be useful in testing the effect of an input
condition on an output status.
Outputs
• View output status. U
• Force output status to 1 (FR1) or 0 (FR0). Note
that forced output values do not affect your
program.
•
Set/Reset output status.
Timers
• Enter a Preset Timer value.
• View the current timer value and status by
selecting the R.T. option.
TCP/IP (Standard
Vision, Visible
when Ethernet
card is installed)
Enables you to view and edit IP address and socket
settings.
System Model & O/S Ver
• Check the controller’s model number and
operating system version.
• Check whether the controller is in Run or Stop
mode.
Working Mode
•
Check whether the controller is in Run or Stop