Specifications

Downloading/Uploading a Project Getting Started
24 VisiLogic: Getting Started
Standard Vision: Download (Ctrl + D)
Enhanced Vision: Download All & Burn (Alt + Ctrl + A)
Creating an
Upload application file
If the PLC contains an upload file, you can upload and edit it using
VisiLogic. To create an upload file, use one of the following options
from the Connection>Download menu:
Standard Vision: Download (Ctrl + D)
Enhanced Vision: Burn 'Upload Project' (Alt + Ctrl + B)
Note
•
Reset Controller at Download
When you edit a project and download it to a controller that
already contains this project, the controller may require reset after
download. Reset is required when changes are made to:
Hardware Configuration
Data Table structure
References to an HMI Display that does not exist in the project
In the following cases, the controller may request reset
If many changes have been made to subroutines or Displays.
Changes in Power-up values
Option Comment Keystroke
Download When you download an edited application to the PLC,select
this option to download changes alone.
If there are many changes, the PLC may request Reset.
Standard Vision:This option burns an Upload file to the
PLCs' FLASH memory.
Enhanced Vision: This option does
not burn an
Upload file to FLASH
To create an upload file, select the option Burn 'Upload
Project' (color only)
(Alt + Ctrl + B)
Ctrl + D
Stop-Download-
Run (Standard
only)
Automatically returns PLC to RUN mode after download.
If there are many changes, the PLC may request Reset.
Alt + Ctrl + D
Stop-Download-
Reset
Forces Reset after download. Alt + Ctrl + R
Download All &
Burn (Enhanced
only)
Back ups the new application in the PLCs' FLASH memory.
Forces Reset after download.
Alt + Ctrl + A
Burn 'Upload
Project'
(Enhanced only)
Enables the entire project to be uploaded from the Vision
PLC.
Forces Reset after download.
Alt + Ctrl + B
Download and See topic Download and Create Download file. none