Specifications

Getting Started Ladder Editor
VisiLogic: Getting Started 15
In a Ladder diagram, the contacts represent input conditions. They lead power
from the left Ladder rail to the right rail. This is why the first element in a net
must always touch the left rail. Coils represent output instructions. In order for
output coils to be activated, the logical state of the contacts must allow the
power to flow through the net to the coil. This is why the elements in a net
must be connected. Each net must contain only one rung.
Use the Ladder Editor to:
Place and connect Ladder Elements.
Apply Compare, Math, Logic, Clock, Store, and Vector functions.
Insert Function Blocks (FBs) into your program.
Build program Modules and Subroutines, and use internal Subroutine
Jumps and Labels.
Place Comments on Ladder nets.
Ladder elements and functions may be dragged and dropped between nets.
Hotkeys are also available for easy programming.
To start the Ladder Editor
Click the Ladder button on the toolbar.
For complete information, please refer to the .pdf manual:
VisiLogic: Ladder Application Programming