Specifications

Appendix B: Vision Controller Divisions Replacing or Removing the Battery
VisiLogic: Getting Started 125
Vision only)
SI 249 Last Active
Keypad Entry Var (V120,
V230, V260, V280, V290
BW only)
SI 250 Currently active
keypad entry (read/write)
(Standard Vision only)
SDW 10 Keypad entry
variable value
Active Keypad
Entry (SBs)
SB 32 HMI Keypad Entry
in Progress (Standard
Vision) rises during
keypad entry
SB 92 HMI Keypad Entry in
Progress (Enhanced Vision)
rises during keypad entry
Keypad Entry:
Focus
After K
eypad Entry, the
next variable set in
Variable Tab Order
automatically becomes
active.
If SB 76 is OFF after Keypad
Entry, the user must use the
arrow keys to move to the
next variable.
Turning SB 76 on causes the
next variable set in Variable
Tab Order to automatically
become active.
Password Entry
via HMI
Correct password
turns SB250 ON
Wrong Password
turns SB251 ON
Legal Entry bit in Password
Variable turns ON when
correct password is entered.
Entering a
legal
keypad entry
value
SB 250 Keypad entry
Within Limits turns ON for
1 scan
SB 94 Keypad Entry Var
Complete + Keypad entry
property: Legal Entry MB
Turns ON when entered
value is within legal limits
Turns OFF when entered
value exceeds legal limits
Entering an
illegal keypad
entry value
SB
251 Keypad Entry
Exceeds Limits turns ON
for 1 scan
Active Keypad
Entry Variables
(SIs)
SI 250 Last Active Keypad
Variable contains the
number of that variable
SI 251 Currently Active
Keypad Entry contains the
number of that variable.
The application can
change
the operand value to force
a variable into active state
SI 250 Last Active Keypad
Variable and SI 251 Currently
Active Keypad Entry contains
the number of the relevant
DLU.
Keypad Vars
Locked
Enhanced Vision (V130
only) Turned ON by user
Turn ON
to lock all keypad entry
variables.
Enter Display
with locked
Keypad Entry
Variables
In Ladder application, set
SB30
Same
Enter ASCII value
Currently Active Keypad Entry