Specifications

Replacing or Removing the Battery Appendix B: Vision Controller Divisions
119 VisiLogic: Getting Started
Appendix B: Vision Controller Divisions
There are two major Vision divisions, Standard and Enhanced.
HMI - Physical differences
Division
Series
Display
Keypad
On
-
board
I/Os
Standard
Vision
V120
Monochrome
Built
-
in
Built
-
in
V230,
V260
Monochrome
Built
-
in
Via Snap
-
in
I/O Modules
V280,
V530,
V290-BW
Monochrome
touchscreen
Virtual
Via Snap
-
in
I/O Modules
Enhanced
Vision
V130
Monochrome
Built
-
in
Built
-
in
V350
Color
Virtual
Built
-
in
V570,
V560,
V290-C
5.7" Color
Touchscreen
Virtual
Via Snap
-
in
I/O Modules
V1040
10.4" Color
Touchscreen
Virtual
Via Snap
-
in
I/O Modules
Communications
MODBUS is
fully
supported
by both divisions. However,
slave
addressing schemes differ. Refer to the MODBUS Help topic Slave
Addressing.
Modems
Standard Vision Division
Controllers in this division can only support a single modem. You can
connect a modem to any COM port. However, note that SB 184 TX
Success and SB 185 TX Failed indicate message transmission status
regardless of the actual COM port connected to the modem.
Enhanced Vision Division
Controllers in this division can support a modem on each COM port. Each
port is linked to a Succeed and Fail SB:
COM1: SB 184 and SB 185, COM2: SB186 and SB 187, COM3: SB 188
and SB 189.
General Features
Division
Download/Upload
Alarms,
String
Library
Operands
Standard
Vision
A downloaded project:
is burned to PLC
FLASH
contains a Upload
file
Not supported
Fast Operands:
Not supported
Enhanced
Vision
Select Download
options
to:
burn project to PLC
FLASH
burn an Upload file
Fully
supported
More operands.
Fast Operands:
Fully supported