Specifications

Appendix A: Troubleshooting Compatibility: HW, OS, SW
VisiLogic: Getting Started 111
Strings:
Mac address to ASCII, Time to ASCII, ASCII to Num,
Logic, RLO to Bit, Set/Reset Bit (SI, SL, SDW)
More:
Immediate: Write to Physical Analog Output, Debug:
Interval
HMI
Previous Variable, Clear rectangle
HMI Features
Clock variable
-
UTC
Enter ASCII String via Keypad
Shape Graphs
Draw Static Axis
Moving image
General features
Interrupt:
High speed counter, Interrupt 2.5mSec
COM Port 2
Does not support a baud
rate of115200 bps
SBs
SB13, ON at Rising Edge of SB3 (1sec pulse)
SB15, ON at Rising Edge of SB7 (100mS pulse)
SB23, Enable all HMI keys during Keypad Entry
SB26, Exiting OS Draw Mode (ON for 1 cycle after
OS draw)
SB27, Enter Display without active Keypad Entry
Variables
SB29, Current keypad entry sets SB 30 (HMI
keypad entries complete)
SB36, INFO mode
SB37, Exclude Last Viewed Display from FIFO
SB38, Invert Touch screen element pixels (Text,
images)
SB54, Key <i>
SB102, MODBUS Read Long: Transpose 16 bits of
32-bit long
SB279, Send SMS message in ASCII format (ON
sends ASCII)
SB280, Force Message Display on Cell Phone
SB300, Reset PLC
SB501, Retain Inputs Forced Value after power
failure
SIs
SI40, Touch screen is being touched
-
X
coordinates
SI41, Touch screen is being touched -Y coordinates
SI50, INFO delay time (default 4 seconds)