Specifications

Power-up Modes: Trouble-shooting Tools
101 VisiLogic: Getting Started
Mode F
eatures
P
ossible Actions
E
X-RC1
V120/130 V230/260 V
280
V350/290/530/ 570/V1040
(touchscreen)
Bootstrap
The controller's LCD is on. PC-PLC communications are enabled, but PC must
b t d t COM 1.
-Via Vision Communication PC Settings, you can:
Check which OS is currently installed in the controller.
Move all DIP switches to 1 <I> + <ESC> <I> + <Right Arrow> <I> + <Right Arrow>
Turn the PLC off. Enter Bootstrap mode by touching the screen and maintaining contact while turning the power on. Bootstrap version V2.00 and up - If no action is taken, the PLC enters Run mode after
several seconds.
Stop (O/S) As in Bootstrap, but Info mode can be entered. As above, but all Info mode actions are supported. Exit Stop Mode by entering Information Move all DIP switches to <I> <I> <I>
Turn the PLC off. Enter Bootstrap mode by touching the screen and maintaining contact while turning the power on. Enter Stop mode by pressing the screen once.
Note • Visions embedded
Bootstrap, default LCD contrast Contrast range is 0- 100, this option automatically sets Contrast to 50. <I> + <ESC> + <+/-> <I> + <Right Arrow> +
<+/
>
Stop (O/S, default LCD contrast Contrast range is 0-100, this option sets Contrast to 50. <I> + <+/-> <I> + <+/->