Specifications

4. Unfolding the Transformer
 Keep the base of the unit on the flat
surface. From the folded position,
while holding the legs down, gently
pull the arm of the Transformer to a
vertical position. (See Figure 2)
 Pull the arm that is connected to the
camera head slowly to a horizontal
position. (See Figure 3) Upon
unfolding the Transformer the LED
light and unit should automatically
turn on.
 Once the unit is open, grasp the feet
and move them away from each
other. Next rotate the camera head
toward the object you wish to
magnify. (See Figure 4)
 To fold back to starting position
repeat steps in reverse.
5. Turning the power on and off
The Transformer will always be off in the
closed position. Upon unfolding the
Transformer the LED light and unit
should automatically turn on in reading
mode. If you wish to turn off the unit
while it is still open, hold down the
Green power button for 3 seconds until
LED light and unit turn off.
(See Figure 1)
Figure 1
Figure 2
Figure 3
Figure 4
12 Chapter 3 Getting Started