Specifications

26
Chapter 7 troubleshooting
• Batteries will not charge
• Can you power the unit using the included AC
adaptor? (pages 10-11)
• Is the power supply properly connected to a surge
protector or AC mains? (page 10)
• Are the correct batteries being used and do they
need to be charged or replaced? (page 18-20)
• Are the batteries inserted correctly? (page 19)
• Are you using rechargeable batteries? (page 18)
• Unit turns off automatically
• To conserve power, your Pebble will automatically
turn off the LCD after 3 minutes of non-use. This is
not a malfunction.
• Are the correct batteries being used and do they
need to be charged or replaced? (page 18-20)
• Pebble begins to make a “beeping” sound
When battery is getting low the unit will start beeping
every 13 seconds. The beeping rate will increase
every minute until it beeps at a maximum warning
rate of once every 3 seconds. Pebble will turn off
about 15 minutes from the time it starts beeping. It
is recommended to charge the battery when the unit
starts beeping. (page 20)
• Pebble is displaying “Charge Battery”
10 minutes after the beeping starts a CHARGE
BATTERY warning will show on screen for 4 seconds
in intervals of every 15 seconds. It is recomended you
charge your Pebble immediatley or it will shut off.
• Unit becomes warm to the touch
Your Pebble integrates a camera, LCD and battery
charging unit inside a small very package, but is
designed to be completely safe and does not pose a
risk of re or damage. It is normal for the Pebble to
become warm (sometimes, very warm) after extended
periods of use. However, this is completely normal and
does not indicate a malfunction.