Specifications

23
Chapter 6 advanCed Features
TIPS FOR USING THE PEBBLE
Figure 1
Turning LED Lighting ON/OFF
Your Pebble has built-in LED lighting to illuminate
your reading material. By default, this lighting will
turn ON automatically whenever the Pebble is
powered on. It is also possible to turn OFF the built-
in LED lighting, if desired. This may be useful when
magnifying certain objects with a highly reflective
surface, such as a glass medicine bottle or glossy
photo. Turning the LED lighting off in these instance
may improve visibility and help to reduce glare. Use
the following procedure to turn off the LED lighting:
1) With the Pebble power turned
on, press and HOLD the
[MODE] button for approximately
4 seconds. This will turn off the
LED lighting (see Figure 1).
2) To restore the LED lighting, either press and
HOLD the [MODE] button again for ~ 4 seconds, or
turn off the power of your Pebble. Each time the
Pebble is powered on, it will automatically default to
the factory setting with the LED lights illuminated.
(see Figure 1).
ADVANCED FEATURES