Specifications

14
Chapter 3 using the pebble
Freezing an Image (Snapshot function)
If desired, you can take a temporary snapshot
(freeze) an image on the display. You can also adjust
the size and color modes after freezing an image.
This feature is quite useful for reading price tags,
prescriptions or other information that may need to
be temporarily captured. Use the following procedure
to take a snapshot (freeze) the image on the display:
1) Find the FREEZE button
located on the top face of your
Pebble (See Figure 1).
2) Press the FREEZE button to
capture the image (See Figure 2).
Pebble will sound a short
confirmation tone (“beep”) when
the image is captured. After
capturing the image, you can
adjust the size or color modes as
described previously on pages 11
& 12.
3) Press the FREEZE button
again (Figure 2) to exit and
resume normal operation of your
Pebble. Turning off the power of
your Pebble will also clear the
frozen image (See Figure 3).
Figure 1
Figure 2
Figure 3