Specifications

13
Chapter 3 using the pebble
Selecting the Viewing mode:
Use the following procedure to select the viewing
mode of the image on the LCD display:
1) Find the MODE button located
on the face of your Pebble
(See Figure 1).
2) Press the MODE button to
continuously cycle through the 6 pre-set
viewing modes. To change your viewing mode to
any of the 28 available follow instructions below.
Changing pre-set viewing modes:
Your Pebble has 4 set viewing modes (full-color,
black & white, enhanced positive, & enhanced
negative) and 2 that can be changed to any of the 28
available. Use the following procedure to select
between the 28 available color modes:
1) Toggle the Pebble with the
MODE button (See Figure 1) to the
color select mode #1 or #2.
2) While holding down the
FREEZE button (See Figure 2),
toggle through the 28 color select
modes by pressing either the ZOOM
(+/-) or MODE button. Once you
identify the desired color select
mode, release the FREEZE button.
The Pebble will now store this color
select mode until changed.
3) Repeat step 2 to change the pre-set color select #2.
Figure 1
Figure 1
Figure 2