User`s manual

Merlin Power Button

The Power button on your Merlin is located on the far right of the control

panel. (#1 above)

• Press the Power button. A green light will illuminate, indicating the power is on.

Power Button on an Enhanced Vision Monitor

On a monitor supplied by Enhanced Vision, the Power button is located in

the lower right front corner of the monitor. (#2 above)

• Press the Power button. A light will illuminate, indicating the power is on.

If your Merlin and monitor are plugged into a power strip/surge protector,

make sure its power switch is turned on before attempting to turn on

Merlin or your monitor. If the power strip/surge protector comes with a

circuit breaker, make sure the circuit breaker has been reset before

attempting to turn on Merlin or your monitor.

Turning on Merlin