Specifications

7
To Move Merlin VGA to Another Location
•IfyouarerepositioningMerlinVGAashortdistanceacrossa
desk or table, make sure you do not pull on any power cords or
connector cables.
•DisconnectandsecureallpowerandVGAcablesandlockthe
X-Y table before moving the unit.
•CarryMerlinVGAonlybythetworecessedhandleslocatedon
either side of its base. Do not carry it by the LCD monitor arm.
Caring for Merlin VGA
•AlwaysturnthepowerOFFfortheMerlinVGAandthemonitor
when the system is not in use.
• Atleastonceperweek,cleantheMerlinVGAwithasoftdrycloth
oranelectrostaticdustingwipe.DONOTuseliquidcleanersonits
plasticsurfaces.Noadditionalmethodsofsterilizationorcleaning
are recommended or required.
Susceptibility to Interference:
There may be temporary degradation of the image when the
Merlin VGA is subjected to a strong radio frequency field,
electrostatic discharge or transient electrical noise. An electrostatic
discharge (caused by static electricity) may cause the screen to go
black. If this happens, switch the unit off and on again.
Compliance Warnings:
•Electromagneticcompatibility:Theuseofaccessoriesandcables
other than those specified by Enhanced Vision may result in
increased emissions or decreased immunity.
•Placementofequipment:TheMerlinVGAshouldnotbeused
adjacent to or stacked on top of other equipment.
Safety and Care