Specifications

21
The Merlin VGA can be programmed in its set-up mode. This allows
you to customize your experience when using the Merlin VGA.
There are 5 options you can select within the programming set-up
mode:
• Exit
• ScreenMessages(On/Off)
• Black&WhiteMode(On/Off).
• ColorSelect(On/Off)
•
Color Select (28 programmable color combinations, see page 16)
Entering Programming Setup:
 1.RotatetheSIZEdial(#1above)allthewaycounter-clockwise,
to the lowest size. This will ensure that you start at the
beginning of the menu options when you enter programming
set-up.
 2.PressandholdtheMODEbutton(#2)forapproximately5
  secondsoruntil“ENTERINGSET-UP”isshownonthedisplay,
Momentarily, the screen will fade to black and the word “EXIT“
will appear on screen.
 3.RotatetheSIZEdial(#1)totherighttoselecteachofthefive
different set-up options.
 4.PresstheMODEbutton(#2)toactivateordeactivateeach
programming option.
5.RotatetheSIZEdial(#1)tomakechangestothedesired
option.
#2
#1
Programming Setup Options