User`s manual

1. No Power to Merlin LCD

• Push the Power button on Merlin LCD’s control panel. A light next

to the Power button should turn on, indicating the power is on.

• Make sure the 12V power supply cord is completely plugged into

the outlet.

• Make sure the two parts of the power supply cord are securely

connected.

• Make sure the power supply cord is completely plugged into the

DC 12V IN jack on the back of the viewing stand base.

• Check the power strip/surge protector’s on/off switch and circuit

breaker if Merlin LCD is plugged into one.

2. Blurred or Out-of-Focus Image

• Clean the protective glass covering the camera with the non-

abrasive lens cleaning cloth provided with your Merlin LCD.

• Clean the monitor screen with a non-abrasive cloth sprayed with a

glass cleaning solution.

3. Merlin LCD Lights are Not ON

• Check that Merlin LCD is ON. If not, check FAQ 1.

• Check that the light switch (item 11 on page 3) under Merlin

LCD’s control panel is ON.

Troubleshooting