User`s manual

19
The Merlin LCD can be programmed in its set-up mode. There are 2
options you can select in set-up mode:
Screen Messages and Color Select.
Entering Set-up
1. Turn the MAGNIFICATION dial (#1 above) all the way
counterclockwise, to the lowest size. This will start you at the
beginning of the menu when you enter set-up.
2. Press and hold the MODE button (#2). Merlin LCD will display
“ENTERING SET-UP.” Then the screen will fade to black and the word
“EXIT“ will appear.
3. Turn the MAGNIFICATION dial to the right to select the different set-up
options.
4. Press the MODE button (#2) to activate or deactivate each option.
Set-up Options
In clockwise order starting at Exit, the options you can program are:
Exit: When programming is complete, select this option and press MODE
to exit.
Screen Messages: If Screen Messages are turned OFF, Merlin LCD will not
display magnification sizes or viewing modes.
Color Select: There are 5 different color combinations available for
programming. Please refer to page 12 on “How to
program a color select option”.
Exiting Set-up
1. Turn the MAGNIFICATION dial all the way
counterclockwise, or to the left, until the word
“EXIT” appears.
2. Press MODE to exit set-up.
Programming Setup Options
#2
#1
EXIT