User`s manual

1. Find a steady and level location,
such as a table or desk, where you
will be comfortable using Merlin
LCD.
2. Carry Merlin LCD only by the two
recessed handles on the sides of the
base for a secure grip. Do not lift
the unit by its LCD monitor arm.
Place it on the table or desk (see
Figure 1).
3. Plug the Merlin LCD 12V power
supply cord into an outlet and the
other end into the DC IN 12V jack
on the back of Merlin LCD’s base.
Make sure the connection is tight
(see Figure 2 and item #10 on
Page 3).
4. Plug the LCD cord into an outlet.
This cord is attached to the LCD
monitor arm (see Figure 3 and item
#12 on Page 3).
6
Setting Up Merlin LCD
Figure 1
Figure 2
Figure 3