Specifications
12
13
ChanGinG ViewinG modesturninG on merlin lCd/plus
The Power button on your Merlin LCD/Plus is located on the far
right of the control panel (item #1 above).
• Press the Power button. Notice the green light will illuminate on the
Control Panel, indicating the power is ON (item #2 above).
• The screen should automatically come on in a few seconds.
If the green light does not illuminate or if an image does not
appear on the LCD monitor, please check the power supply
connections (review steps 2-4 on page 11 for details).
NOTE: If your Merlin LCD/Plus is plugged into a power strip/surge
protector (recommended), make sure its power switch is turned on
before attempting to turn on Merlin LCD/Plus. If the power strip/
surge protector comes with a circuit breaker, make sure the circuit
breaker has been reset before attempting to turn on Merlin LCD/
Plus.
You can choose a viewing option by pressing the MODE button on
the control panel. Each press will cycle through all 7 viewing
options.
The available viewing options are:
• Full Color Image
• Black and White Image
• Enhanced Positive Image
• Enhanced Negative Image
• Color Select 1
• Color Select 2
• Color Select 3
This mode is used most often because it gives you a true color
representation of the image that is being magnified. When Merlin
LCD/Plus is first turned on, it displays the image in full color.
Based on your preference, you can choose the black-and-white
mode.
Enhanced Positive
Enhanced Negative