Merlin LCD/Plus Merlin LCD TM Users Manual TM Merlin LCD Plus TM
Congratulations on your purchase of Merlin LCD/Plus from Enhanced Vision. Merlin LCD/Plus is a full-color, auto-focus video magnifier system designed to enhance the lifestyle of the visually impaired. With the LCD monitor’s adjustable arm, Merlin LCD/Plus can provide the user with the ultimate flexibility in the positioning of the screen.
Safety and care Safety and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Merlin LCD/Plus at a Glance . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Setting Up Merlin LCD/Plus . . . . . . . . . . . . . . . . . . . . . . . . . 11 Turning on Merlin LCD/Plus . . . . . . . . . . . . . . . . . . . . . . . . . 12 Changing Viewing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 Using Color Select . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Electrical Safety Precautions Additional Mechanical Safety Precautions • The power supply cord is a disconnect device for electrical equipment. The socket-outlet should be installed near the equipment and be easily accessible. The Merlin LCD/Plus contains moving parts. Please use caution when moving the X-Y table, adjusting the LCD monitor arm, or when transporting the Merlin LCD/Plus to avoid possible injury to hands and fingers.
To Move Merlin LCD/Plus to Another Location • If you are repositioning Merlin LCD/Plus a short distance across a desk or table, make sure you do not pull on any power cords or connector cables. Take a few moments to familiarize yourself with the components of your Merlin LCD/Plus: • Disconnect and secure all power and video cables and lock the X-Y table before moving the unit. 1. Merlin LCD/Plus 2.
Setting up merlin lcd/plus 1. Find a steady and level location, such as a table or desk, where you will be comfortable using Merlin LCD/Plus. Carry the unit only by the two recessed handles on the side of the base for a secure grip. Do not lift the unit by the LCD monitor arm. Place it on the table or desk (see Figure 1). 2 3 1 Figure 1 6 5 2. Connect the short end of the “Y” power cord to the Merlin LCD/Plus Power Supply Transformer (see Figure 2 and items #12 & #13 on page 10).
turning on merlin lcd/Plus #2 Changing viewing modes #1 Merlin LCD/Plus Power Button The Power button on your Merlin LCD/Plus is located on the far right of the control panel (item #1 above). • Press the Power button. Notice the green light will illuminate on the Control Panel, indicating the power is ON (item #2 above). • The screen should automatically come on in a few seconds. You can choose a viewing option by pressing the MODE button on the control panel.
Enhanced Positive Image This mode provides a white background with black text. This mode increases the contrast to offer crisp text images for reading. Enhanced Negative Image This mode provides a black background with white text. This mode increases the contrast to offer crisp text images for reading. Color Select 1 This mode provides a blue background with yellow text. This is one of the most commonly used color combinations.
Step 2: Rotate the SIZE dial to scroll through the available menu options. Choose COLOR SELECT (see the photo at right) and press the MODE button. COLOR SELECT Step 3: Rotate the SIZE dial to choose the Color Step 2 Select number (1-5) you wish to program. Press the MODE button and choose one of the following options: a) Rotate the SIZE dial to cycle through the color combination of your choice (1-14).
Changing magnification Changing Brightness Figure 1 You can increase or decrease the size (magnification) of the image by using the SIZE dial at the center of the control panel (see Figure 1). There are sixteen levels of magnification available on Merlin LCD/Plus. • To increase the size of the image, turn the dial clockwise, or to the right. SIZE-7 • To decrease the size of the image, turn the dial counterclockwise, or to the left.
using the x-y table tips for reading and writing Locking the X-Y Table Reading with Merlin LCD/Plus To lock the X-Y table, slide the lever all the way to the right until it clicks and locks (A). Unlock the X-Y table by sliding the lever to the right again and release the lever (B). • New users of video magnifier systems have a tendency to overmagnify their reading material. Make the type large enough to see it comfortably, but not so large that it becomes tedious to scan across a page.
Programming setup options #2 #1 #2 The Merlin LCD/Plus can be programmed in its set-up mode. This allows you to customize your experience when using the Merlin LCD/Plus. There are 5 options you can select within the programming set-up mode: • Exit • Screen Messages (On/Off) • Black & White Mode (On/Off). • Color Select (On/Off) • Color Select (28 programmable color combinations, see page 16) Entering Programming Setup: 1. Rotate the SIZE dial (#1 above) all the way counter-clockwise, to the lowest size.
Setting up with your computer 4. To attach the Feature Kit Control Box*, connect the loose end of the Feature Kit Control Box coiled cord to the “Control Box” input on the rear of the Merlin LCD/Plus as shown. Do not use extreme force when making this connection, as the end connector will only fit in one direction (see Figure 4). The Merlin Plus permits computer connectivity using the included VGA extension cable (Plus version only).
Using the feature kit control box Using the Control Box (included with Merlin LCD Plus only) Once the Feature Kit Control Box is properly connected, use the following procedures to take advantage of the enhanced features on your Merlin LCD/Plus Feature Kit Control Box: Using a Computer with Merlin LCD/Plus turned OFF 1) Press the [LINES] button to activate the line maker function. Press the button again to select either horizontal/vertical line markers. Press the button again to exit.
Using a external VGA monitor Programming Reference Using an external VGA monitor The Merlin LCD/Plus has advanced capabilities for modifying the default language used within the setup menus. These settings are completely optional and should not be changed under normal circumstances. The chart listed below is for reference purposes only. Please see your Enhanced Vision representative or call our toll-free technical support should it be necessary for you to modify these settings.
Merlin LCD/Plus Programming Reference Troubleshooting 1. No Power to Merlin LCD/Plus • Push the Power button on Merlin LCD/Plus’s control panel. A light next to the Power button should turn on, indicating the power is on. • Make sure the power supply cord is completely plugged into the AC outlet. • Make sure the two parts of the power supply cord are securely connected. • Make sure the power supply cord is completely plugged into the DC 15V IN jack on the back of the viewing stand base.
X-Y Table Does Not Move Smoothly • Make sure the locking lever is positioned completely to the left. X-Y Table Does Not Stay in Locked Position • Make sure the locking lever is all the way to the right and that the handle pops up into the locking slot. Replacement LED lamps Your Merlin LCD/Plus comes equipped with two 100,000-hour LED lamps designed to provide years of trouble-free service.
Color Modes: - 4 Default Modes (True Color, Black & White, Enhanced Positive, Enhanced Negative) - 5 Color Select Modes 3 Default Modes: (Yellow on Blue, Black on Yellow, Yellow on Black) 2 Programmable* Modes *Up to 28 Programmable Color Select Mode Combinations are available XY Table: XY table size: 16” (406 mm) x 16 1/4” (413 mm), 3/8” retaining edge Working space height: 7 3/8” (18.
Flipper Panel – Integrated and Portable! This powerful, portable magnifier integrates the Flipper 225-degree rotating camera with a slim, LCD platform. Powered by an innovative battery pack, the Flipper Panel runs up to 4 hours on a single charge. The discrete camera projects a full-color, auto-focus image on the screen for both near and distance viewing. Magnification: 1X – 26.
Warranty Statement Enhanced Vision Merlin LCD/Plus Video Magnifier Warranty Policy Enhanced Vision products are designed to give you the highest quality image, convenient features, ease of use and reliable service. Merlin LCD/Plus has been inspected and tested prior to shipping. Our company stands behind the quality materials, components and workmanship of the Merlin LCD/Plus video magnifier. For these reasons we are pleased to offer two warranty options.
The Merlin LCD/Plus video magnifier is designed to enlarge and enhance images to improve the lives of people who have low vision. The extent to which Merlin LCD can improve the ability to see images and text depends on a person’s individual condition and level of visual impairment. Merlin LCD/Plus is not designed to restore vision, correct eye conditions or halt degenerative vision loss. An eyecare professional can best determine the suitability of Merlin LCD/Plus for a patient’s specific condition.
