User manual

29
28
Saving and Recalling Images
The DaVinci has the ability to save images from CCTV or OCR modes.
This will allow the user to take a snapshot of a document, save it, and view
it at a later time.
Saving an Image
1. See Page 22 to turn on the Save & Recall feature on the DaVinci.
2. Place a document underneath the camera head and set the desired
Color Mode and Zoom.
mm.dd.yyyy – hh:mm [OCR/IMG] The DaVinci will name that image by
the month, day, year, time, and mode it was saved at.
3. Press and hold the button on the DaVinci Control Console for
2 seconds. When the image is saved the DaVinci will display “IMAGE
SAVED”. If the storage space is full, the DaVinci will display “DEVICE
FULL” with a voice prompt (if enabled)
*In CCTV mode, if you save the image consecutively within a minute,
the previous image saved will be overwritten.
**In OCR mode, if you save the image consecutively within a minute,
the DaVinci will display “Already Saved”
Recalling a Saved Image
1. Press and hold the
RECALL
button on the DaVinci Control Console
for 2 Seconds.
2.The DaVinci will enter the Recall Image
menu displaying a list of available images.
If the storage space is empty, the DaVinci
will display “NO FILES” with a voice
prompt (if enabled).
3. Use the Zoom Wheel
on the
DaVinci Front Panel or DaVinci Control
Console to navigate through the list of
images. When an image file on the list is
highlighted, it will display a preview of that
image on the right side of the screen.
saVing anD reCalling images
To exit the Recall Menu back to CCTV mode, press the Capture
Button on the DaVinci Control Console.
4. Pressing the Find button on the highlighted file will display the image in
full screen and begin to read aloud if saved in OCR mode.
To exit the full screen display back CCTV mode, press the Capture Button
on the DaVinci Control Console.
Deleting a Saved Image
1. While in Image Recall Menu use the
Zoom Wheel on the DaVinci
Front Panel or DaVinci Control Console to navigate to an image.
2. Press the Pause/Play button on the DaVinci Control Console on
the desired image file.
3. A sub menu will appear next to the selected image allowing you to
“CANCEL” or “DELETE”.
4. Use the
Zoom Wheel on the DaVinci Front Panel or DaVinci
Control Console to select “CANCEL” or “DELETE”.
5. Pressing the FIND button on DaVinci Front Panel or DaVinci Control
Console while “CANCEL” is highlighted will bring you back to the Image
Recall menu. Pressing the FIND button on DaVinci Front Panel or DaVinci
Control Console while “DELETE” is highlighted will delete the selected
image. The DaVinci will display “IMAGE DELETED” when the file has been
successfully deleted and return to the list of images. Pressing the MODE
button will allow you to exit the Image Recall menu.
saVing anD reCalling images