Specifications

21
Troubleshooting
Unit is warm:
AMIGO integrates a battery charger and a powerful camera
processing unit, it is normal for the unit to be warm when ON.
Note: When charging the battery inside the Amigo keep the
unit in the open position (see page 9, figure 1).
There seems to be a “delay” when moving the unit or using
the writing stand:
A slight delay in use is normal. When using the writing
stand, proceed writing slowly on the target material.
Viewing Amigo on a TV
1. Plug one end of the 6-foot VIDEO-OUT Cable to the
VIDEO-IN jack on your TV.
2.
Plug the other end into the VIDEO-OUT jack on the Amigo.
3. Change your TV channel to the Video Mode to display
the images on your TV set.
4. Some of the remote control buttons associated with
changing the video mode on your TV include the
following:
TV/Video
Auxiliary or AUX
EXT, External 1, External 2 or External 3
Video, Video 1, Video 2 or Video 3
Input, Input 1, Input 2 or Input 3
If you are still having problems, refer to your TV manual to
find “Video Mode”.