Specifications

19
Troubleshooting
2. Make sure the correct power supply is plugged into
the Amigo. (see page 7 item 12 and 13)
3. Press the power button for more than 1 second and the
Amigo should turn on.
Image too dark:
If a picture is present on the display but excessively dim in
Color mode, check the lights under the unit underbody. A
white light should clearly be visible. If no lights are ON call
Enhanced Vision Tech Support.
Blurred images:
1. Can be caused by finger prints or dirt on the glass
underneath the unit. Make sure the glass is cleaned
with a lens cleaning cloth. Use the cleaning cloth or a
cotton swab only when needed.
2. Hold or place AMIGO directly on the target material
to read. AMIGO is designed to be in focus when
positioned on the target material.
3. If using the Writing Stand, some level of blurriness is
unavoidable. Only use the writing stand for applications
requiring your handwriting and at minimum
magnification. Resume normal use without the writing
stand whenever possible.
Controls do not respond:
1. This is caused by a stuck button. Make sure that none
of the thumbwheels are stuck between two different
positions. When turning a wheel, a detent effect
should be felt.