Specifications

18
Troubleshooting
No Power:
1. Make sure the two contact pins in the battery
compartment are sticking out. (see figure 1) The pins
should protrude out of the housing for proper insertion
into the battery holes.
2. Make sure the battery is charged and correctly inserted
into the unit. (see Charging the Battery on page 9 or 16)
3. Press the power button for more than 1 second and the
Amigo should turn on.
4. If the power does not turn on, try using the Amigo
power supply. (see using Amigo with Power Supply on
page 10) Most likely the battery needs to be charged.
Amigo Green Light is blinking:
If the green indicator light is blinking fast then the battery is
very low. Charge the battery by plugging the Amigo power
supply in to Amigo and an outlet.. (see Charging the Battery
on page 9) Note: The indicator light will continue to blink
slowly while the battery is charging.
Unit turns OFF suddenly:
1. Make sure the two contact pins in
the battery compartment are
sticking out. Pins should protrude
out of the housing for proper
insertion into the battery inserts.
(see figure 1)
Make sure the battery is charged and correctly inserted
into the unit.
figure 1