Specifications

17
Connecting Amigo to a TV
To connect Amigo to a TV you will need the Video
Cable. Plug one end of the Video Cable into the “Video
Out” jack on the back of Amigo and the other end into
the yellow “Video Input” jack on the front or back of
your TV. Then switch your TV to Video Mode. This will
allow you to view magnified images on your TV screen.
(see figure 2)
Yellow VIDEO IN
on front or back
of TV
Video Out Cable
Video Out
Connecting to TV
figure 2
See page 7
item 14.
Note: The LCD remains OFF when using the PAL
version connected to a TV.