Specifications

Tightening the LCD Hinge

Depending on the user’s

preference, the LCD hinge can be

tightened or loosened. To tighten

the hinge, turn the phillips screws

clockwise located on the front of

the unit. To loosen the hinge, turn the phillips screws

counter clockwise. DO NOT OVER TIGHTEN.

Writing with Amigo

1. Place the writing stand over desired material. The

tallest portion of the stand should be facing you.

2. Turn the Amigo ON. Gently set the Amigo into the

stand with Power Button facing you. Tilt the LCD

toward you.

3. Make sure the viewing mode is set to either Color or

Black & White mode. Reduce the magnification to

the lowest level.

4. Place your pen under stand

and write on the material.

Using Amigo