Specifications

10
Using the Amigo with the Power Supply
Follow the steps below:
1. Connect the Power Supply
together with the Right Angle
Power Supply Plug. (see figure 1)
2. Connect the Power Supply into
the Amigo where it says DC IN.
(see figure 2)
3. Plug the power supply into a
wall outlet or preferably a power
strip.
4. Press and hold the power button
for more than a second and the
Amigo will turn on.
Adjusting the Size
To adjust the size, rotate the dial
located on the side of the unit
labeled “Size.” There are 5
magnification levels. (see figure 3)
Adjusting the Viewing Mode
To adjust the Viewing Mode,
rotate the dial located on the side
of the unit labeled “Mode.” (see
figure 4)
Using Amigo
figure 1
figure 2
figure 3
figure 4