Specifications

9
Amigo comes with one charged external battery and one
charged battery inside the unit for optimum battery life.
We
recommend before using your Amigo to plug it into an
outlet and charge the battery inside the unit for up to three
hours.
Charging the battery in Amigo:
Follow the steps below to charge the battery:
1. Connect the Power Supply together with the Right
Angle Power Supply Plug. (see page 7, item 12 and 13)
2. Connect the Power Supply into the unit where the
DC IN is located. (see page 5, item 7)
3. Plug the Power Supply into an outlet or preferably
a power strip. The green LED indicator light will blink
when battery is low (see page 5, item 8).
4. You can use the unit and charge the battery at the same
time.
Note: When charging the battery inside the Amigo it must
be in the open position (see figure 1).
When not using AMIGO for some
time it is always best to remove the
battery from the compartment.
Using Amigo
figure 1