User manual

Connecting Transformer VGA
The Transformer VGA comes with a specially - desig ned VGA cable which is
used to connect the Transformer VGA dongle to the back of the Portable
Monitor (See Figure 1). Please note that if you purchased the Transformer
VGA and the Portable Monitor together this cable is already connected to
the back of the monitor.
Use the following procedure to connect the Portable Monitor to
Transformer VGA:
1) Prior to connecting the Transformer VGA to the Portable
Monitor make sure the Transformer battery is fully charged.
You may want to purchase extra batteries and an external
charger since the monitor battery can last 2 – 3 times
longer.
2) Connect the small end of the VGA cable to the VGA Input
on the dongle (See Figure 2).
3) Connect the large end of the VGA cable to the VGA In input
on the rear of the Portable Monitor (See Figure 3).
4) Press the power button on both the Transformer VGA and
Portable Monitor. Make sure the video source on the monitor is
set to VGA input. You may need to press the ‘Video Source’
button on the right side of the monitor a few times to toggle to
VGA input. (See Figure 4).
5) You will need to power off both the Transformer VGA and
Portable Monitor when you are done using the systems.
Figure 4
Figure 3
Figure 1
Figure 2
13