User manual

4. Double check the setting of RAID level and RAID PD slot. If no problem,
click “
“.
5. Finally a confirm page is shown with detail RAID info. If no problem,
click “
“ to start migration.
6. Migration starts and it can be seen from the “status 3” of a VG with a
running square and an “M”. In “/ Volume config / User data volume”,
it will display a “M” in “Status 4” and complete percentage of
migration in “R%”.
Figure 4.2.1
Figure 4.2.2
(Figure 4.2.2: A RAID 0 with 2 physical disks migrates to RAID 5 with 3 physical disks.)
Figure 4.2.3
(Figure 4.2.3: A RAID 0 migrates to RAID 5, complete percentage is 1%.)
Enhance technology UltraStor RS16
- 49 -