User manual

Figure 3.6.1
3.6.1 SAF-TE configuration
SAF-TE represents SCSI Accessed Fault-Tolerant Enclosures, one of the
enclosure management standards. Enter “SAF-TE config” function can enable
or disable the management of SAF-TE from buses.
Figure 3.6.1.1
(Figure 3.6.1.1: Enable SAF-TE in Bus 0, SCSI ID 15, and LUN 0.)
The SAF-TE client software is available at the following web site:
safte-monitor:
http://oss.metaparadigm.com/safte-monitor/
SANtools: http://www.santools.com/
Enhance technology UltraStor RS16
- 41 -