User manual

Caution
Be careful to avoid conflicts between SCSI ID at the same
SCSI bus.
Step 4: Set global spare disk.
To set global spare disks, please follow the procedures.
1. Select “/ Volume config / Physical disk”.
2. Select the free disk(s) by clicking the checkbox of the row, then click
“
“ to set as global spares.
3. There is a “GS” icon shown up at status 1 column.
Figure 3.5.7.7
(Figure 3.5.7.7: Slot 5 has been set as global spare disk.)
Step 5: Done. They can be used as SCSI disks.
Delete UDVs, VG, please follow the steps.
Step 6: Detach LUN from UDV.
In “/ Volume config / Logical unit”,
Enhance technology UltraStor RS16
- 34 -