User manual

(Figure 3.5.7.4: Create UDVs named “UDV-R5-1” and “UDV-R5-2”, related to “VG-R5”, the
size of “UDV-R5-1” is 9984MB (it’s multiple of base stripe height, so the number may not
be the same as the setting size.), the size of “UDV-R5-2” is 10944MB. The status of these
UDVs are online, write back, high priority with cache volume 100MB. “UDV-R5-2” is
initialing about 91%. There is no LUN attached.)
Step 3: Attach LUN to UDV.
There are 2 methods to attach LUN to UDV.
1. In “/ Volume config / User data volume”, press “
”.
2. In “/ Volume config / Logical unit”, press “ ”.
The following screen will be shown, please follow the procedures:
Figure 3.5.7.5
1. Select a UDV.
2. Choose Bus ID, SCSI ID and LUN to attach, then click “
”.
3. Done.
4. Do one more to attach another UDV.
Figure 3.5.7.6
(Figure 3.5.7.6: UDV-R5-1 is attached to Bus 0, SCSI ID 0, and LUN 0. UDV-R5-2 is attached
to Bus 1, SCSI ID 2, and LUN 0.)
Enhance technology UltraStor RS16
- 33 -