User manual

2.3 Management methods

There are three management methods to manage S Series controllers, describe

on the following:

2.3.1 Web GUI

S Series controllers support graphic user interface to manage the system. Be

sure to connect LAN cable. The default IP is 192.168.0.1; so open the browser

and type:

http://192.168.0.200

Click any function at the first time; it will pop up a dialog to authenticate.

Default password: 1234

2.3.2 RS-232 serial port

Use NULL modem cable to connect console port.

Default baud rate: 115200, 8 bits, 1 stop bit, and no parity.

Terminal type: vt100

Default password: 1234

2.3.3 Remote control – secure shell

ssh (secure shell) is required for S Series controllers to remote login. The ssh

client software is available at the following web site:

SSHWinClient WWW:

http://www.ssh.com/

Putty WWW: http://www.chiark.greenend.org.uk/

Host name: 192.168.0.1

Default password: 1234

Enhance technology UltraStor RS16

- 10 -